Call 08048608392 90% Response Rate

Send Email

Lab Equipment

Our range of products include compression testing machine, standard penetration test apparatus, flow table for concrete, triaxial cells, length gauge and cube moulds.
Compression Testing Machine

Compression Testing Machine

Product Price: Rs 2.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationLaboratory
Display TypeDigital
BrandSankon Technologies India Pvt. Ltd.
Phase3 Phase
Frequency50 Hz
Voltage440 V
Country of OriginMade in India

Compression Testing Machine The machine incorporates a heavy duty Power Pack and Type DLI-2 Digital Load and Pace Rate Indicator similar to Type DLI-1 Load Indicator, but with an additional provision for stress calculation at peak value. The variation in pace rate is indicated by 8 LED (4red / 4green) provided on the front panel. Supplied complete with a set of spacer blocks of 50 mm. and 100 mm.

Get Best QuoteRequest A Callback
Standard Penetration Test Apparatus

Standard Penetration Test Apparatus

Product Price: Rs 30,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
MaterialAluminum
Is It AdjustableAdjustable
BrandSankon Technologies India Pvt. Ltd.
ShapeTriangular
Pipe Length5 Meter
No Of Legs3

Standard Penetration Test Apparatus
Confirms to IS: 2131 It comprises of Tripod Stand consists of three nos. 5 metre long metal legs ( Each leg in two pieces) with a tee bolt and pulley block.Supplied complete with a Drop Hammer 63.5 kgs.wt., with lifting eye guide assembly, ‘A’ type adaptor and two end caps, to give a free fall of 75 cm. for the drop hammer. Supplied without split spoon sampler and type ‘A’ drill rod.

Get Best QuoteRequest A Callback
Flow Table for Concrete

Flow Table for Concrete

Product Price: Rs 1.25 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel, Mild Steel
Voltage240 V
FinishingColor Coated, Polished
BrandSankon Technologies India Pvt. Ltd.
Frequency50/60 Hz
Power SourceElectric

Flow Table for Concrete Conforms to IS: 1199. This instrument is recommended for concrete, where the nominal size of coarse aggregates does not exceed 38 mm. It is comprised of a flow table top of 762 mm. diameter, machined from a brass casting and fitted on a heavy duty cast iron frame. A cam action provides a free fall of 12.5 mm. to the table. A brass conical mould of 120 mm. height with a base diameter of 250 mm. and a top diameter of 170 mm. is also provided, along with a tamping rod of 16 mm. diameter x 600 mm. long.

Get Best QuoteRequest A Callback
Triaxial Cells

Triaxial Cells

Product Price: Rs 20,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
MaterialStainless Steel
BrandSankon Technologies India Pvt. Ltd.
ApplicationIndustrial
Surface TreatmentPolished
WeightMax. 50Kg
Outer Cell DiameterMax. 750 mm

SankonTriaxial Cells are constructed from precision machined non-ferrous material. Particular attention is paid to the quality of the honed finish between the stainless steel piston and the bushing. This reduces friction to an absolute minimum and prevents water leakage. The piston load capacity is designed specimen test. The cell cylinders are made from acrylic plastic material and are reinforced by fibre glass bonding in universal models to withstand large lateral pressures.

Get Best QuoteRequest A Callback
Length Gauge

Length Gauge

Product Price: Rs 500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandSankon Technologies India Pvt. Ltd.
MaterialIron and Wood
Usage/ApplicationTesting Aggregates
LengthMax. 30 cm
ThicknessMax. 8 mm
WidthMax. 8 cm

Length Gauge Conforms to I S : 2386 (Part - 1) Used for determination of elongation index of aggregate. It is constructed of steel and is mounted on a hard wooden base.

Get Best QuoteRequest A Callback
Cube Moulds

Cube Moulds

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
MaterialStainless Steel
ShapeSquare
ColorBlue
BrandSankon Technologies India Pvt. Ltd.
Surface TreatmentColor Coated
Available SizeMax. 300 mm
ApplicationIndustrial

Cube Moulds:

  • Conforms to IS 518 and 10086

150 mm. Cube:
  • Other sizes available from 50mm to 300mm
Get Best QuoteRequest A Callback
Rebound Hammer

Rebound Hammer

Product Price: Rs 40,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
Packaging TypePlastic Case
Impact Energy2.207Nm (1.63ft-lbf)
Compressive StrengthMax. 10,152psi (Max. 70MPa)
Product Dimensions2.1 x 14in (53 x 356mm), Dia.xH
Estimated Shipping Weight5.0lb (2.27kg)
Rebound Hammer with standard accessories and Plastic Carrying Case      
Get Best QuoteRequest A Callback
California Bearing Ratio CBR Appratus

California Bearing Ratio CBR Appratus

Product Price: Rs 50,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
Automation GradeAutomatic
PhaseSingle Phase
Flow RateTriaxial Cells
Voltage240 V
Frequency50/60 Hz
BrandSankon Technologies India Pvt. Ltd.

California Bearing Ratio “Sankon” California Bearing Ratio Apparatus is made both forlaboratory and field use. CBR test is to evaluate the bearing capacity of soil for the flexible pavement design. It is extensively used for the selection of materials and control of subgrades. The potential expansion/consolidation of the specimen is also measured before each test, under known surcharge weights.

Get Best QuoteRequest A Callback
Direct Shear Apparatus

Direct Shear Apparatus

Product Price: Rs 55,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
MaterialMild Steel
FinishingColor Coated
BrandSankon Technologies India Pvt. Ltd.
Frequency50 Hz
Input Voltage240 V
Power SourceElectric
ApplicationIndustrial

Direct Shear Apparatus The Direct Shear Apparatus utilizes a square or a circular shear box, which is divided into two halves horizontally. This shear box contains the specimen, which is subjected to a constant normal load, while an increasing horizontal force is applied to one of the sections of the shear box.This force causes the specimen to shear along the plane separating the two halves. By subjecting a number of specimens to different normal loads, a relationship between shearing strength and vertical stress can be established. The hand operated and motorised machines have been designed for easy handling and continuous use.

Get Best QuoteRequest A Callback
Consolidation Test Apparatus

Consolidation Test Apparatus

Product Price: Rs 1.1 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationLaboratory
ColorBlue and Silver
MaterialSS and MS
Automation GradeSemi-Automatic
Surface FinishingColor Coated
BrandSankon Technologies India Pvt. Ltd.
Power SourceElectric

Consolidation Test Apparatus Consolidation is a process by which increments of load are shifted to the soil structure, initially being carried by the water in the pores. This process is accompanied by change in volume. Soils of similar strength may exhibit varying consolidation characteristics. Representative samples taken from the field when tested in the laboratory will give characteristics of the settlement conditions which are liable to occur at site. The accuracy of laboratory test results will mostly depend on the specimen preparation and the efficiency of the apparatus.

Get Best QuoteRequest A Callback
Los Angeles Abrasion Machine

Los Angeles Abrasion Machine

Product Price: Rs 65,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
MaterialMild Steel
Frequency50 Hz
Voltage440 V
BrandSankon Technologies India Pvt. Ltd.
Phase3 Phase
Diameter48 mm
Surface TreatmentColor Coated

A rolled steel cylinder with an inside diameter of 700 mm. and internal length of 500 mm. A detachable shelf, extending throughout the inside of the drum is fixed to avoid the abrasive charge from falling on the cover. Through a reduction gear driven by a motor, this cylinder is connected to stub shafts and mounted on a sturdy steel frame to rotate about its horizontal axis at 30 to 33 RPM. A tray is placed on the frame under the drum to collect the material after the test. An automatic revolution counter is also provided to count the number of revolutions. Supplied with twelve hardened steel balls of 48 mm. diameter.

Get Best QuoteRequest A Callback
Aggregate Impact Value Apparatus

Aggregate Impact Value Apparatus

Product Price: Rs 7,800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandSankon Technologies India Pvt. Ltd.
Automation GradeSemi-Automatic
MaterialStainless Steel
LengthApprox. 2 Feet
Surface FinishPolished
ApplicationIndustrial

Conforms to IS: 2386 (Part - 4) It consists of A circular base and support columns constructed to form a rigid frame around the quicIt consists of:k release ‘trigger’ mechanism for a free fall of the hammer; a cylindrical steel cup with hardened inner surface 102 mm. I.D. x 50 mm. deep; a metal cylindrical measure 75 mm. I.D. x 50 mm. deep; a tamping rod 10 mm. diameter x 230 mm. long.

Get Best QuoteRequest A Callback
Flakiness Test Gauges

Flakiness Test Gauges

Product Price: Rs 500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
MaterialStainless Steel
Automation GradeManual
Usage/ApplicationIndustrial
ColorSilver
FinishingPolished
Packaging TypeBox

Conforms to IS: 2386 (Part - 1) Used for determination of flakiness index of coarse aggregates. It consists of a frame with a sliding panel having slots of different dimensions.

Get Best QuoteRequest A Callback
Slump Test Apparatus

Slump Test Apparatus

Product Price: Rs 2,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
MaterialMild Steel
Usage/ApplicationConstruction
FinishingGalvanized
BrandSankon Technologies India Pvt. Ltd.
Rod LengthApprox. 2 Feet
Country of OriginMade in India

Slump Test Apparatus Conforms to I S: 1199 & 7320 It consists of A slump cone with lifting handles made of mild steel sheet, a chrome plated steel tamping rod 16 mm. diameter x 600 mm. long, rounded off at one end, with a scale marked on it and a steel base plate having clamps and swivel handle.

Get Best QuoteRequest A Callback
Loading Frames

Loading Frames

Product Price: Rs 60,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationLaboratory
MaterialMild Steel and Stainless Steel
BrandSankon Technologies India Pvt. Ltd.
VoltageMax. 380 V
Frequency50/60 Hz
Power SourceElectric
Surface FinishingColor Coated

“Sankon” machines are simple in design and robust in construction to ensure trouble free operation. Large hand wheels are provided in the manually operated machines for ease of operation. Hand wheels are provided in the electrical versions too, for operation during power failure. The machines are primarily intended for triaxial test on samples upto 100 mm. diameter, but can be fitted with relevant accessories for Unconfined and CBR tests as well. Each loading frame is fully overloaded and tested so that it can operate at full speed under full load conditions.

Get Best QuoteRequest A Callback
Proving Rings

Proving Rings

Product Price: Rs 10,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
MaterialAluminium
BrandSankon Technologies India Pvt. Ltd.
ShapeRound
Pressure1-50Kn
Automatic GradeAutomatic
Display TypeAnalog

“Sankon” Proving Rings are made of special alloy steel, carefully forged, to provide high and stable accuracy, dependability and repeatability. They are machined for maximum fibre strength and plated for rust resistance. All Proving Rings have been designed with integral bosses to `void deflection errors caused by misalignment, dither if manufacture or in use. Bosses ff Proving Rings upto 100 kN are internally threaded, so that they can be mounted on to ` loading frame easily. Proving Rings are a convenient deans of measuring applied loads. The indicator has a sensitivity of 0.002 mm./div. and the deflection is directly proportional to the applied load. All Proving Rings are supplied in a strong wooden carrying case with work’s calibration chart.

NPL / NCCBM Calibrat:

  • ion can also be arranged at an additional cost. Repeatability as stipulated in IS: 4169.
Get Best QuoteRequest A Callback
Rodo Meter

Rodo Meter

Product Price: Rs 3,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationSurvey
Weight0.314 kg
Display TypeAnalog
Operation TypeMechanical
Wheel Diameter4 mm
ColorBlack and Yellow
We deal in the entre range of GNSS RTK, Optical and GIS Hand Held Surveying Instruments i.e. Total Stations, Auto and Digital Levels, Digital Theodolites, Geodetic Global Positioning Systems, DGPS, GNSS, Civil/Survey Engineering Softwiare
Get Best QuoteRequest A Callback
Cylindrical Moulds

Cylindrical Moulds

Product Price: Rs 2,800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
DiameterMax. 150 mm
ShapeCylindrical
Surface TreatmentColor Coated
BrandSankon Technologies India Pvt. Ltd.
MaterialCast Iron
HeightMax. 300 mm
Cylindrical Moulds (Cast Iron):
  • 100 mm. diameter x 200 mm. height
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Lab Equipment"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

4/5

★★★★★★★★★★

Reviewed by 7 Users

  • 5★4
  • 4★1
  • 3★1
  • 2★0
  • 1★1
  • User Satisfaction
  • Response100%
  • Quality     100%
  • Delivery   100%

Most Relevant Reviews

M
★★★★★★★★★★
05-March-21
Manish
Delhi, Delhi
Product Name : Automatic Level Instrument
Response
Quality
Delivery
T
★★★★★★★★★★
20-September-19
Tarun
Delhi, Delhi
Product Name : Level Instruments
Thanks
Response
Delivery
R
★★★★★★★★★★
27-May-20
RAJIB MALIK
Kolkata, West Bengal

© Sankon Technologies India Pvt. Ltd.. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.